★★★★★
Shower had been running cold randomly for months. Turned out to be the balancing cartridge, not the whole valve like another company told us. Fixed in under an hour.
Trent L. · Storm Lake, IA
Hydro Jetting · Storm Lake, Iowa
Hydro Jetting in Storm Lake, Iowa
A cable makes a hole through a blockage. A jetter takes the blockage off the wall of the pipe. That difference is why a Storm Lake kitchen line that gets cabled every spring often never needs it again after one jetting - the grease layer that was narrowing the pipe is gone rather than perforated.
Call (833) 435-9778 and describe what is happening. We will give you an arrival window before you hang up and a flat price before anyone starts work - the same price at 2am as at 2pm.
- 24/7 in Storm Lake
- Flat price
- Same-day service
Call a plumber now
(833) 435-9778Answered 24 hours a day, including weekends and holidays.
Call (833) 435-9778- The same line clogs again every few months
- A commercial kitchen line that backs up during service
- Grease visible when the cleanout is opened
When to call us in Storm Lake
- The same line clogs again every few months
- A commercial kitchen line that backs up during service
- Grease visible when the cleanout is opened
- Roots that keep returning after cabling
- Old cast iron that has scaled down to a narrow channel
- A camera pass showing build-up along the whole run
What the visit covers
- Camera pass first to confirm jetting is safe for the pipe
- Nozzle matched to grease, roots or scale
- Pressure set to the pipe material, not cranked to maximum
- Debris flushed out rather than pushed downstream
- Second camera pass to verify the finished line
- Maintenance interval recommended for commercial lines
Spring thaw is when sump pumps get tested
A sump pump in Storm Lake sits idle for months and then has one important night. That is usually also the night the power flickers. We check the float, the check valve and the discharge line, and we talk to most Storm Lake homeowners about a battery backup, because an unbacked pump and a storm outage is how basements flood here.
Hydro Jetting across Storm Lake
Billybob Plumbing covers Storm Lake and the surrounding communities. Call for service anywhere in the area.
Storm Lake customers on our hydro jetting work
★★★★★
Fast, polite, and they put down drop cloths without being asked. Small thing, but it tells you how the rest of the job is going to go.
Petra S. · Alta, IA
★★★★★
Whole house repipe. They planned the access holes first, kept water on every night, and cleaned up properly each day. Five days and far less mess than I braced for.
Georgina P. · Lakeside, IA
Other plumbing services in Storm Lake
Water Leak Repair in Storm Lake
Acoustic and thermal leak detection that finds the pipe before we open the wall, then a proper repair rather than a patch.
Read moreTankless Water Heater Installation in Storm Lake
Endless hot water and a wall back in your basement, done with the gas line and venting sized properly rather than hoped at.
Read moreWater Heater Repair in Storm Lake
No hot water, not enough of it, or a puddle under the tank. Diagnosed and repaired the same day where the tank is worth saving.
Read moreEmergency Plumber in Storm Lake
Burst pipes, sewage backing up, no water in the house. We answer the phone at 2am and roll a truck the same night.
Read moreFaucet Repair in Storm Lake
Dripping faucets, failing shower valves, dead shutoffs and new fixture installs done without wrecking the finish.
Read moreFrozen Pipe Repair in Storm Lake
Thawed safely, checked for splits as it comes back, and the run insulated or rerouted so next winter is quieter.
Read moreHydro Jetting near Storm Lake
Same service, same pricing, in the communities around Storm Lake.
Hydro Jetting in Storm Lake: common questions
Is hydro jetting safe for old pipes?
Not always, which is why we camera first. A sound clay or cast iron line handles jetting fine at the right pressure. A line that is already cracked or badly deteriorated should be repaired, not jetted, and we will tell you that.
How is jetting different from snaking?
A cable bores a channel through the clog and the line reopens at reduced diameter. Jetting strips the build-up off the pipe wall so you get the full bore back. Snaking is faster and cheaper; jetting lasts far longer.
How often should a restaurant jet its grease line in Storm Lake?
Most Storm Lake kitchens do well on a six month interval, busier ones on quarterly. We set the schedule off what the camera shows in your line rather than a generic number.
Will jetting cut tree roots?
Yes, a root nozzle cuts roots back to the pipe wall. It does not fix the crack or joint that let them in, so we usually pair it with a camera inspection and a conversation about lining.
Do you serve the smaller towns around Storm Lake?
We do. Our Storm Lake coverage extends through the surrounding communities, and we run across the whole state, so being outside the city limits does not mean waiting longer or paying a travel premium.
Hydro Jetting in Storm Lake, day or night
One number, answered around the clock, with the price agreed before we start.
(833) 435-9778