★★★★★
Kitchen sink had been draining slowly for months. He cleared it, then showed me the grease he pulled out and explained why it kept coming back. No upsell, no drama, and the price was what I was quoted on the phone.
Beth A. · Washington, IA
Hydro Jetting · Washington, Iowa
Hydro Jetting in Washington, Iowa
A cable makes a hole through a blockage. A jetter takes the blockage off the wall of the pipe. That difference is why a Washington kitchen line that gets cabled every spring often never needs it again after one jetting - the grease layer that was narrowing the pipe is gone rather than perforated.
Call (833) 435-9778 and describe what is happening. We will give you an arrival window before you hang up and a flat price before anyone starts work - the same price at 2am as at 2pm.
- 24/7 in Washington
- Flat price
- Same-day service
Call a plumber now
(833) 435-9778Answered 24 hours a day, including weekends and holidays.
Call (833) 435-9778- The same line clogs again every few months
- A commercial kitchen line that backs up during service
- Grease visible when the cleanout is opened
When to call us in Washington
- The same line clogs again every few months
- A commercial kitchen line that backs up during service
- Grease visible when the cleanout is opened
- Roots that keep returning after cabling
- Old cast iron that has scaled down to a narrow channel
- A camera pass showing build-up along the whole run
What the visit covers
- Camera pass first to confirm jetting is safe for the pipe
- Nozzle matched to grease, roots or scale
- Pressure set to the pipe material, not cranked to maximum
- Debris flushed out rather than pushed downstream
- Second camera pass to verify the finished line
- Maintenance interval recommended for commercial lines
Tree roots and the front yard
Mature trees are one of the nicer things about older Washington streets and one of the harder things on sewer lines. Roots do not break into a sound pipe - they find a joint that has already opened slightly and then widen it. Cutting them buys a season; lining the pipe ends it.
Hydro Jetting across Washington
Billybob Plumbing covers Washington and the surrounding communities. Call for service anywhere in the area.
Washington customers on our hydro jetting work
★★★★★
Garbage disposal was humming and I assumed it was dead. He freed the jam, hit the reset, and did not charge me for a new unit I did not need. Honest is the word.
Kev S. · Kalona, IA
★★★★★
Called about a gas smell near the water heater. They told me to get out of the house first and call the utility, then came and found it. Took it seriously, which I appreciated.
Rhoda J. · Wellman, IA
Other plumbing services in Washington
Water Softener Installation in Washington
Iowa water is hard. A properly sized softener protects the water heater, the fixtures and everything you wash.
Read moreWater Heater Replacement in Washington
Old tank out, new tank in, usually inside a morning. Correct venting, new flex lines, expansion tank and a permit where the city wants one.
Read moreRepiping in Washington
Whole-house repipes and main water line replacement when patching galvanised or polybutylene has stopped making sense.
Read moreWater Heater Repair in Washington
No hot water, not enough of it, or a puddle under the tank. Diagnosed and repaired the same day where the tank is worth saving.
Read moreGas Line Repair in Washington
Gas smell, a leak on the meter side, or a new run for a range, dryer, grill or garage heater. Pressure-tested every time.
Read moreDrain Cleaning in Washington
Slow sinks, gurgling tubs and clogged main lines cleared with a cable or a jetter, then camera-checked so it stays clear.
Read moreHydro Jetting near Washington
Same service, same pricing, in the communities around Washington.
Hydro Jetting in Washington: common questions
Is hydro jetting safe for old pipes?
Not always, which is why we camera first. A sound clay or cast iron line handles jetting fine at the right pressure. A line that is already cracked or badly deteriorated should be repaired, not jetted, and we will tell you that.
How is jetting different from snaking?
A cable bores a channel through the clog and the line reopens at reduced diameter. Jetting strips the build-up off the pipe wall so you get the full bore back. Snaking is faster and cheaper; jetting lasts far longer.
How often should a restaurant jet its grease line in Washington?
Most Washington kitchens do well on a six month interval, busier ones on quarterly. We set the schedule off what the camera shows in your line rather than a generic number.
Will jetting cut tree roots?
Yes, a root nozzle cuts roots back to the pipe wall. It does not fix the crack or joint that let them in, so we usually pair it with a camera inspection and a conversation about lining.
How much does a plumber cost in Washington?
We quote flat, per job, before any work starts. You hear the number on the phone or at your door, you agree to it, and it does not change because the job took longer than expected. There is no hourly clock running while we diagnose.
Hydro Jetting in Washington, day or night
One number, answered around the clock, with the price agreed before we start.
(833) 435-9778